This Stainless Steel Can Cooler is designed to hold most popular brand name standard size canned beverages. Screw on lid is equipped with a rubber gasket that securely grips and holds your can in place. Once secured, your drink stays refreshingly chilled sip after sip for up to 12 hours. Comes individually boxed.
Great to personalize with sublimation or laser printing
Use Shrink Wrap Sleeve size 9.8" x 5.9" for an all over design
Be sure remove the black rubber lining if using a convection oven.
- Insulated Stainless Steel can cooler
- 350ml (12oz) capacity, size 4.57"H x 3.189"x 3.189
- Sublimate, QDS Metal transfer paper, vinyl
- Easy to be personalized, great gift idea
- Stylish design with screw on lid and rubber gasket for insulation
- Make sure to print with mirror image
- Press for 45 - 60 seconds at 375-390°F with light to moderate pressure
- Secure image to insulator with heat tape
- Press in mug press for allotted time and temp. Be careful not to overpressure the insulator in the press
- After pressing, remove insulator from mug press and immediately submerge into water to cool. Once cool remover paper
- Parameters for reference: 350-400*F, 5-6mins - convection oven and shrink wrap
Heat Transfer Process
- Follow transfer paper instructions for best results.
- Preheat mug press to 310° or recommended temperature
- Print transfer onto Hard Surface paper
- Position transfer onto product and secure with heat tape.
- Press for allotted time and pressure recommended for your transfer paper
- Remove from press and peel transfer warm or cold per your transfer paper
Download our template here