Faux Log Wood Ornament

Whte Wash Faux Sliced Log Ornament 3.5"x 3.75"

Looks like real wood but it is very light which makes it perfect for your tree.

Create beautiful personalized Christmas decorations or it also makes a great tag for presents!

Perfect for QDS Wood/Leather laser transfer papers, HTV or Laser Engraving! You can also use your UV-LED Printer.

Laser Recommendations (Raster Only)
• 60 watt laser | 80% power | 50% speed | 600 DPI
• Clean surface with soft cloth misted with isopropyl alcohol

Rotary Recommendations
• Insert 0.15 FLX engraver bit into rotary spindle. Zero bit to micrometer. Adjust engraving depth to 0.005” | 12,000 RPM | 1”/sec.
• Clean surface with soft cloth misted with isopropyl alcohol

Heat Transfer Recommendations
• Oki Pro8432WT w/ GeoKnight Heat Press | QDS Laser Wood Hard Surface 1 Paper

• Clean surface with soft cloth misted with isopropyl alcohol

• Temp. 300°F | 40 sec. Cover transfer with foam pad. Peel cold

Or follow Heat Transfer Vinyl instructions - Specialty Materials Thermoflex Turbo can be used on wood.

UV LED Print
• Clean surface with soft cloth misted with isopropyl alcohol prior to printing.

Note: These settings are offered as a safe starting point for your fabrication. Minor adjustments may be needed to achieve optimal results.